Stationary X Ray Apparatus
This family of apparatus is designed for work in stationary conditions in X-ray laboratories and protection cabinets. They are used for classic radiography, X-ray real time TV system and in industrial tomography.
The apparatus is available in three modifications with different types of X-ray tubes with different focal spot sizes and, accordingly, different anode power at the X-ray tube:
| N | Apparatus name | The focal spot size, mm | Maximum anode power, W |
| 1 | 0,2 SBK 200 S | 0,5 x 0,6 | 200 |
| 2 | 0,3 SBK 200 S | 0,8 x 0,8 | 300 |
| 3 | 0,6 SBK 200 S | 2,0 x 2,2 | 600 |
At all three X-ray tubes anode target is reflective type, with tungsten and radiation filtration with 2 mm aluminum equivalent.
The working radiation diagram is conical with angles at the vertex 60°x 40°.
In agreement with the customer, it is possible to create a narrowed diagram by putting a special collimator joint on the X-ray unit body.
The apparatus can operate at full anode power continiously. X-ray unit is cooled with forced air flow. The X-ray unit can operate in any position.
The apparatus can be controlled in two different modes:
✔From the Remote Control Block with cable;
✔From interface RS-485.
This apparatus provides a high stability of output radiation, so it can be used in X-ray television systems and industrial tomographs. In this case, the apparatus is used with control from the RS 485 interface. The Power and Control Block has a connector for connecting an external lock of protection cabinet door.
Operating temperature range of the system 0℃ + 40℃
X-ray Unit dimensions 780 x 190 x 150 mm
X-ray Unit weight 10.8 kg
Power and Control Block dimensions 280 x 260 x 160 mm
Power and Control Block weight 5.5 kg
Remote Control Block dimensions 155 x 100 x 30 mm
Remote Control Block weight 0.4 kg
Power supply from AC main 100 ÷ 240 V 50 ÷ 60 HZ