MH310 Portable Leeb Hardness Tester

MH310 portable Leeb hardness tester, based on Leeb hardness measuring principle, quick and easy on-site test the hardness of series metal materials, support free conversion between Leeb, Brinell, Rockwell hardness scale and others,It uses high-contrast  segment LCD to display clear ,stable performance. integrated high-speed thermal printer ,which can print on-site measurements. It is widely used in annealing, tempering, quenching , quality control for the work piece; hardness testing for machine tool and automobile chassis ; on-site hardness testing of in-service non-removable parts ; quality testing for hardware, forging, machine tools and special steels; quality control for batch production process and so on.Good quality and effective cost ,which is a wise choice for regular need of hardness testing .

Function & Application:

Die cavity of molds

Bearings and other parts

Failure analysis of pressure vessel, steam generator and other equipment

Heavy work piece

The installed machinery and permanently assembled parts.

Testing surface of a small hollow space

Requirements of formal original record for test results

Material identification in the warehouse of metallic materials

Rapid testing in large range and multi-measuring areas for large-scale work piece

Features:

Measuring range：（170～960）HLD

Error and repeatability ：Impact device D  760±30HLD,±6 HLD；

530±40HLD,±10 HLD

Impact device DC 760±30HLDC,±6HLDC；

530±40HLDC,±10HLDC

Impact device DL  878±30HLDL,±12HLDL；

736±40HLDL,±12 HLDL

Impact device D+15   766±30HLD+15,±12HLD+15；

544±40HLD+15,±12HLD+15

Impact device G    590±40HLG,±12HLG；

500±40HLG,±12HLG

Impact device C    822±30HLC,±12 HLC；

590±40HLC,±12 HLC

Impact direction：vertically downward, oblique, horizontal, oblique, vertical upward, automatically identify

Material：Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron,Nodular cast iron,Cast aluminum

alloys,BRASS(copper-zinc alloys),BRONZE(copper-aluminum/tin alloys),Wrought copper alloys

Hardness Scale：HL、HB、HRB、HRC、HRA、HV、HS

Paper roll: width (57.5 ± 0.5) mm, diameter: 30mm, long-term imports of paper to ensure long-term data storage

Display：High-contrast Segment LCD

Integrated data memory： 100 measurement series.(Relative to average times 32～1)

Battery:  6V( Ni-MH battery pack)

Power supply: 9V/500mA

Recharge time:2.5-3.5hours

Continuous operating period：about 150 hours（with default brightness）

Communication：USB1.1

Based on the principle of Leeb hardness testing theory. It can measure many metallic material

One main unit can match to 6 impact devices

Support Steel ,when using D/DC sensor to test steel,it can show HB directly,no need to check manually.

High-contrast Segment LCD ，easy to use

Software calibration automatically.

100 groups (impact times 32 ~ 1) hardness measurements, each set of data includes single testing value, average value, measurement date / time, impact direction, frequency, material, hardness, and other information.

Real-time display the remaining battery power, charging progress is displayed while charging.

High brightness EL back-light display for easy use in dimly environment.

Automatic sleep and shutdown and other power-saving features

Integrated thermal printer with the instrument as a whole, and quiet operation, fast print speeds, you can print the test report on-site.

Equipped with PC software (optional), with functions of measurements transmission , value storage management, statistical analysis of the measured value, the print report of measured value, batch setting instrument parameters , to meet the higher  requirements of quality for activities and management.