450kv Industrial High Frequency Fixed X-Ray Machine
450kV high frequency X-ray machine selects high-quality metal ceramic tube matching high-voltage power supply and cooling products to provide the highest 6000W continuous working X-ray machine. It can provide a stable X-ray source for non-destructive testing, industrial CT, biological irradiation, thickness measurement, scientific research and other applications.
The modulator of the ray machine adopts high-frequency double closed-loop control, no need to add auxiliary regulated power supply, overcome the interference and fluctuation of external network voltage through its own rectified power supply, and the imaging is stable.
It is not disturbed by the fluctuation of the on-site power supply and fully guarantees the stability of the radiation output dose. The bipolar power supply adopts dual modulator control, which fully overcomes the problem of voltage imbalance between two poles caused by single modulator control, and prolongs the service life of the tube. The whole machine has powerful protection functions, with kV and mA follow-up protection. For any kV and mA values, 1%-5% of the protection value can be set, and a slight discharge can achieve microsecond protection.
System Configuration
|
|
X-ray Tube Tube Voltage: 0-450kV
Tube Current: 0-10mA Power: 900W/4500W Focus Size: EN12543 d=2.5mm/d=5.5mm Radiation Angle: 40° Cooling Flow: 14L/min |
| High Frequency and High Voltage Generator
|
Cathode + Anode
Working Frequency: 40kHz Maximum Power: 5000W Ripple: 0.5% Insulation Method: oil insulation Maximum Current: 30mA Power Supply: 230VAC(±10%), 50Hz Operating Environment: 0-45℃, 60-90% RH no condensation High Voltage cable: 7m Power Cable: 10m |
| Controller
|
Control Cable: 20m
Operation Interface: Chinese and English switching Focus: Large/small focus switch (in case of dual focus) Voltage Setting and Control: 0~450kV, step size 0.1kV, accuracy ±0.1% Current Setting and Control: 1~25mA, step length 0.1mA, accuracy ±0.1% Exposure Time and Control: 0~99min Automatic Training Machine: automatically select training program according to the downtime (not mandatory) Exposure Parameter Memory: able to record the exposure parameters and recall them according to the record Fault Protection and Alarm: over voltage, overcurrent, undervoltage, undercurrent, Arc (sparking) protection, high frequency inverter failure,cooler failure, interlock, over temperature failure |
| Cooler
|
Cooling Power: 4500W (30℃)
Cooling Medium: oil (air cooling) Flow Rate: 14L/min Power Supply: AC 220V, 300W Size: 705X535X730mm Weight: 50kg Output Connector: quick connector 1/4″ Flow Switch: 14l/min is not adjustable, below 4l/min, the signal is open Thermostat: The start and stop temperature of refrigeration is adjustable, the factory setting is 50℃ alarm for oil cooler Shutdown Delay Cycle: adjustable, factory setting 3min Tubing: 2 pieces, 7m |
| Stand
|
Vertical lift: 600-1800mm Tube rotation: 0-90° |
List
| Name | Quantity |
| X-ray Tube | 1 |
| High-voltage Cable | 2 |
| High Voltage Generator | 1 Set |
| X-ray Machine Controller | 1 Set |
| Radiation Warning System | 1 Set |
| Cooling System | 1 Set |
| Matching Cable | 1 Set |
| Stand | 1 Set |
